Delmhorst-instrument Navigator Manual do Utilizador

NAVIGATOR MOISTURE MAPPING METER Owner’s Manual Version 2.1 For Navigator Meters starting with Serial #11212 Delmhorst Instrument

Copyright  2007, Delmhorst Instrument Co. Page 10 of 28 TO SET THE ALARM IN BASIC SCAN MODE: 1. If you wish to set the alarm to beep after a pre-

Copyright  2007, Delmhorst Instrument Co. Page 11 of 28 Settings stored in each particular mode will not be affected by restoring defaults in a dif

Copyright  2007, Delmhorst Instrument Co. Page 12 of 28 Use the ï ð keys to toggle between residential and commercial. After you have made yo

Copyright  2007, Delmhorst Instrument Co. Page 13 of 28 TO DEFINE ROOM LOCATION AND MATERIAL DESIGNATION: 1. Using the ñ ò keys on the CREATE JOB

Copyright  2007, Delmhorst Instrument Co. Page 14 of 28 Note: The default selection is OAK for the floor and SHEETROCK for the wall and ceiling. I

Copyright  2007, Delmhorst Instrument Co. Page 15 of 28 This screen contains the following information: Job # and ID, current location (LOC), numbe

Copyright  2007, Delmhorst Instrument Co. Page 16 of 28 3. The default status of the alarm is “OFF.” Press the SELECT key to turn it on. 4.

Copyright  2007, Delmhorst Instrument Co. Page 17 of 28 At any time, you may modify Temperature (T), location (LOC), or switch to SCAN mode (GOTO S

Copyright  2007, Delmhorst Instrument Co. Page 18 of 28 Note: Memory deletion and restoring defaults are both irreversible. • EXIT: This menu opt

Copyright  2007, Delmhorst Instrument Co. Page 19 of 28 all have ample delays built in to allow the other link components to come online in any seq

Copyright  2007, Delmhorst Instrument Co. Page 2 of 28 TABLE OF CONTENTS PAGE GENERAL DESCRIPTION & FEATURES 4 OPERAT

Copyright  2007, Delmhorst Instrument Co. Page 20 of 28 • Return to Main Menu: This menu option returns the meter to Main Menu. The meter also re

Copyright  2007, Delmhorst Instrument Co. Page 21 of 28 are 10, 20, 30sec. It is recommended that the backlight delay be set to the minimum amount

Copyright  2007, Delmhorst Instrument Co. Page 22 of 28 ⇒ Set the meter’s parameters as described previously in the owners’ manual. If the speci

Copyright  2007, Delmhorst Instrument Co. Page 23 of 28 will move into a hygroscopic (wood) floor, or build-up pressure under a non-breathing synth

Copyright  2007, Delmhorst Instrument Co. Page 24 of 28 TESTING DRYWALL ⇒ Set the meter scale for Sheetrock® as described in the Create/Modify a

Copyright  2007, Delmhorst Instrument Co. Page 25 of 28 CARE OF YOUR METER Ø Store your meter in a clean, dry place. The protective carrying cas

Copyright  2007, Delmhorst Instrument Co. Page 26 of 28 SERVICE FOR YOUR METER Ø Before sending in your meter we recommend you give one of our tr

Copyright  2007, Delmhorst Instrument Co. Page 27 of 28 WARRANTY Delmhorst Instrument Co., referred to hereafter as Delmhorst, guarantees the Na

Copyright  2007, Delmhorst Instrument Co. Page 28 of 28 APPENDIX A: Room list – Residential Jobs Number Abbreviation Description Page 1 1 LR L

Copyright  2007, Delmhorst Instrument Co. Page 3 of 28 TESTING CONCRETE SLABS 23 TESTING INSULATION 24 TESTING DRYWALL 24 CARE OF YOUR

Copyright  2007, Delmhorst Instrument Co. Page 4 of 28 GENERAL DESCRIPTION/FEATURES Thank you for your purchase of Delmhorst Instrument Co’s newly

Copyright  2007, Delmhorst Instrument Co. Page 5 of 28 OPERATING INSTRUCTIONS -User Guide- This guide provides step-by-step instructions on poweri

Copyright  2007, Delmhorst Instrument Co. Page 6 of 28 INSTALLING THE BATTERY: The battery compartment is located on the underside of the case, at

Copyright  2007, Delmhorst Instrument Co. Page 7 of 28 TO POWER THE METER ON: To turn the meter on, press and hold the SELECT button for approx. 2

Copyright  2007, Delmhorst Instrument Co. Page 8 of 28 3. Use the òkey to highlight the default material (Oak) if you wish to change it to a diffe

Copyright  2007, Delmhorst Instrument Co. Page 9 of 28 TO CHANGE THE TEMPERATURE CORRECTION: Navigator defaults to a temperature of 70ºF. As wood